These instructions are a work in progress. Please print out this page and make corrections to these instructions as you install your printer, then give me the changes. Thanks! B.H.
This printer prints one-sided
Do the following:
Start -> Printers and Faxes -> Add a printer
When "Welcome to the Add Printer Wizard" appears, click on Next >
Options "Local (usb) printer" and
"Wireless or internet printer" will appear.
Choose Wireless or internet printer.
click on Next >
A list of detected printers will be given. For this printer,
the manufacturer is Hewlett Packard
the model is HP2430
the printer Name or IP Address is 128.205.113.103
the desired port name is jetdirect2
If the desired printer in on the list, select it and click on Next >
If the printer is not on the list, enter this information and click on Next
Under Printer Sharing, select Do not share.
Click on Next>
Name your printer "printer2".
Your printer should now be installed, but your system does not yet
know there is an extra print tray
and duplex printing available.
My Computer -> Control Panel -> printing -> printerd
Properties -> Device Settings -> Tray 2 -> Letter
Printing Preferences -> Finishing -> Print on Both Sides (D) -> Long Edge binding
Print a test page.
Note: At the website, http://printer2.math.buffalo.edu hosted by the printer itself, you can see information about
To access "Administrator Mode", you will need the password hidden under the panel on the right side of the printer.